E-Tec 504 is a dry-to-touch, hard-film, solvent-based lubricant and rust and corrosion inhibitor for ferrous and non-ferrous metals that produces 50 hours of salt spray resistance. Meets military spec for water displacement (Mil-C-16173D, Grade 3).



E-Tec 504 is a dry-to-touch, hard-film, solvent-based lubricant and rust and corrosion inhibitor for ferrous and non-ferrous metals that produces 50 hours of salt spray resistance. Meets military spec for water displacement (Mil-C-16173D, Grade 3).
E-Tec 504 is specifically formulated for hot black oxide lines because it is extremely stable. Absorbs up to 5% by weight sodium hydroxide and retains its properties. Leaves a thin, transparent film which seals out moisture and is continuous, polar, and non-conductive. Will not gum under high humidity or temperature. Harmless to plastic, rubber, paint, and certain silicones. Can be applied to wet or dry metal parts while in process or storage.
E-Tec 504 is specifically formulated for hot black oxide lines because it is extremely stable. Absorbs up to 5% by weight sodium hydroxide and retains its properties. Leaves a thin, transparent film which seals out moisture and is continuous, polar, and non-conductive. Will not gum under high humidity or temperature. Harmless to plastic, rubber, paint, and certain silicones. Can be applied to wet or dry metal parts while in process or storage.
Best Seller | No |
---|---|
Processes | Water Displacing Oils |
Hazardous Material | No |
Industrial Use Only | No |
Replacement For / Same As | Dri-Touch IRP1, Pen Dip A, Water Displacing Oil |