E-Tec 504 is a dry-to-touch, hard-film, solvent-based lubricant and rust and corrosion inhibitor for ferrous and non-ferrous metals that produces 50 hours of salt spray resistance. Meets military spec for water displacement (Mil-C-16173D, Grade 3).
E-Tec 504 is specifically formulated for hot black oxide lines because it is extremely stable. Absorbs up to 5% by weight sodium hydroxide and retains its properties. Leaves a thin, transparent film which seals out moisture and is continuous, polar, and non-conductive. Will not gum under high humidity or temperature. Harmless to plastic, rubber, paint, and certain silicones. Can be applied to wet or dry metal parts while in process or storage.
E-Tec 504 is specifically formulated for hot black oxide lines because it is extremely stable. Absorbs up to 5% by weight sodium hydroxide and retains its properties. Leaves a thin, transparent film which seals out moisture and is continuous, polar, and non-conductive. Will not gum under high humidity or temperature. Harmless to plastic, rubber, paint, and certain silicones. Can be applied to wet or dry metal parts while in process or storage.
| Best Seller | No |
|---|---|
| Processes | Water Displacing Oils |
| Hazardous Material | No |
| Industrial Use Only | No |
| Replacement For / Same As | Dri-Touch IRP1, Pen Dip A, Water Displacing Oil |
