E-Tec 510

Samples Available *

Provided as an emulsion concentrate that, when diluted, can result in varying films, thicknesses, dry times, and coverage. The resulting emulsion is known in the metal-finishing industry to last longer because of an extremely stable emulsion formulation in black oxide and phosphate applications. Contains no VOCs like water-displacing oils.

Produces approximately 24 hours of resistance to 5% salt spray and 96–150 hours with a 20% solution. Formulated to dry quickly at ambient temperatures. Drying may be accelerated by use of heat, forced air, or perforated conveyor belts.

Learn More

E-Tec 512

Samples Available *

A high-performance formula that results in a thin, waxy, and dry-to-the-touch film.

Can be used at full strength or diluted. Provides excellent lubricity and anti-wear characteristics through Falex tests. Can be used over black oxide, zinc/manganese phosphate finishes, and bare steel. Full strength provides up to 150 hours of salt spray.

Learn More

E-Tec 515

Samples Available *

A high-performance emulsion concentrate that, when diluted, can result in varying films, thicknesses, dry times, and coverage. Produces a slightly more oily and corrosion finish than E-Tec 510. Contains no VOCs like water displacing oils. Produces an industry-leading stable emulsion that lasts longer over black oxide and phosphate applications.

Produces approximately 50 hours resistance to 5% salt spray, and 96–150 hours with a 20% solution. Formulated to dry quickly at ambient temperatures. Drying may be accelerated by use of heat, forced air, or perforated conveyor belts.

Learn More

There is a small fee for samples shipped in the continental U.S. This can range from $10–$75. Products shipped outside the continental U.S. can be subject to certain restrictions. Freight charges may range from $75–$300.