For Industrial Use

E-Phos 630

A manganese phosphate coating for steel and iron that provides corrosion resistance and lubrication.

A heavy, coarse coating that has excellent break-in properties and reduces wear, scoring, and galling on moving parts. Retains oils, rust preventatives, and lubricants. Coating 1,500+ mg./sq. ft. Meets Mil-P-16232 specifications.

Learn More
Documentation
Related Products
E-Kleen SR 102-E

Heavy-duty non-silicated, oil-emulsifying, high-caustic liquid soak cleaner to remove carbon smut from steel. Mixture of surface...

E-Tec 501

A slightly oily solvent and calcium-based lubricant and rust and corrosion inhibitor for ferrous and non-ferrous metals that...

E-Tec 502

A thin and slightly oily solvent and calcium-based lubricant and rust and corrosion inhibitor for ferrous and non-ferrous metals...

E-Tec 503

A dry-touch, glossy solvent and calcium-based lubricant and rust and corrosion inhibitor for ferrous and non-ferrous metals that...

Collapse Information
For Industrial Use

E-Phos 660

A calcium-modified formulation that produces a fine-grained crystalline coating on iron and steel.

Can be used by immersion or spray. Formula remains fine-grained regardless of cleaning method used prior to application. Coating weight of 600 mg./sq. ft. Meets MIL-P-16232 and AMS 2840G requirements.

Learn More
Documentation
Related Products
E-Kleen SR 102-E

Heavy-duty non-silicated, oil-emulsifying, high-caustic liquid soak cleaner to remove carbon smut from steel. Mixture of surface...

E-Tec 520

A mildly alkaline water-based solution that deposits a hard, clear, and glossy dry finish. Contains no VOC's for interior...

E-Tec 529

A liquid concentrate that inhibits corrosive attack for weeks to months, E-Tec 529 protects copper and copper-alloy parts while in...

E-Tec 528

A mild liquid-based chemical composition that helps eliminate staining, streaking, water spotting, and tarnishing of plated metal...

Collapse Information
For Industrial Use

E-Phos 661

A dark-grey coating that produces a fine-grained crystalline coating on iron and steel. High iron tolerance up to 15 points. Generates 30–40% less sludge than other heavy zinc phosphates.

Heavy coating weight of 2000+ mg/ft2. Does not contain EDTA and eliminates sludge buildup on heating coils. Provides superior corrosion resistance up to 250 hours of salt spray. Temperature: 140–180° F. Concentration: 5% by volume in water. Immersion Time: 8–20 minutes. Meets Mil-P 16232G Type Z specifications.

Learn More
Documentation
Related Products
E-Phos NCr Seal-Z

A liquid concentrate that removes residue and significantly improves corrosion resistance of iron and zinc phosphates. Does not...

E-Kleen SR 102-E

Heavy-duty non-silicated, oil-emulsifying, high-caustic liquid soak cleaner to remove carbon smut from steel. Mixture of surface...

Collapse Information
For Industrial Use

E-Phos NCr Seal-Z

A liquid concentrate that removes residue from phosphate finishes on iron.

Does not contain chromates. Improves corrosion resistance and adhesion of paint. Complies with MIL SPEC 16232-G, Type Z, Class 4 when used with E-Phos 661. 24-hour salt spray.

Learn More
Documentation
Related Products
E-Phos 600

A concentrated liquid cleaner and iron phosphate for steel, aluminum, and zinc. Tolerates alkaline carry-over and can operate at...

Collapse Information

There is a small fee for samples shipped in the continental U.S. This can range from $10–$75. Products shipped outside the continental U.S. can be subject to certain restrictions. Freight charges may range from $75–$300.