For Industrial Use

E-Strip 930

A single-component solution that strips tin plating from steel surfaces. 

Solution must be agitated with bottom-fed compressed air or mechanically for effective stripping. Will not attack steel during stripping. Used at 100% concentration. Does not contain any chlorides or use ammonium hydroxide or ammonia gas.

Learn More
Documentation
Related Products
E-Brite 30/30

Alkaline non-cyanide processE-Brite 30/30 is an easy-to-use, one-tank process that eliminates the need for cyanide or...

E-Brite Ultra Cu

Alkaline non-cyanide process E-Brite Ultra Cu is an outstanding pre-plate copper strike for bright nickel, acid copper, tin, and...

E-Brite 5.0 Cu

Alkaline non-cyanide processThe E-Brite 5.0 Cu formula solves the immersion problem in copper barrel plating. It plates directly...

E-Brite 205-K

Acid process Leveling acid copper that smooths out rough surfaces for additional plating processes. Produces exceptionally bright...

Collapse Information
For Industrial Use

E-Strip 922

E-Strip 922 is used at room temperature to strip copper plate from steel/iron surfaces. 

E-Strip 922 is highly buffered and low in ammonium hydroxide concentration. It will not etch the steel and iron surfaces. The process does not require presence of copper metal in the solution to initiate copper stripping. It consists of two components:

E-Strip 922-A – Buffer & make-up stripper
E-Strip 922-B – Controls stripping speed

Learn More
Documentation
Related Products
E-Brite 30/30

Alkaline non-cyanide processE-Brite 30/30 is an easy-to-use, one-tank process that eliminates the need for cyanide or...

E-Brite Ultra Cu

Alkaline non-cyanide process E-Brite Ultra Cu is an outstanding pre-plate copper strike for bright nickel, acid copper, tin, and...

E-Brite 5.0 Cu

Alkaline non-cyanide processThe E-Brite 5.0 Cu formula solves the immersion problem in copper barrel plating. It plates directly...

E-Brite 205-K

Acid process Leveling acid copper that smooths out rough surfaces for additional plating processes. Produces exceptionally bright...

Collapse Information
For Industrial Use

E-Strip 949 RTU (ready to use)

E-Strip 949 RTU is one component immersion nickel stripper that can be operated at room temperature without current. 

E-Strip 949 RTU was developed to eliminate the use of cyanide and short-lived compounds for stripping nickel from steel rapidly. Not only does E-Strip 949 RTU strip nickel from steel, but it will strip nickel from common substrates such as copper and brass. It is also long-lived and it does not fume when used.

Learn More
Documentation
Related Products
E-Brite 30/30

Alkaline non-cyanide processE-Brite 30/30 is an easy-to-use, one-tank process that eliminates the need for cyanide or...

E-Brite Ultra Cu

Alkaline non-cyanide process E-Brite Ultra Cu is an outstanding pre-plate copper strike for bright nickel, acid copper, tin, and...

E-Brite 5.0 Cu

Alkaline non-cyanide processThe E-Brite 5.0 Cu formula solves the immersion problem in copper barrel plating. It plates directly...

E-Brite 205-K

Acid process Leveling acid copper that smooths out rough surfaces for additional plating processes. Produces exceptionally bright...

Collapse Information

There is a small fee for samples shipped in the continental U.S. This can range from $10–$75. Products shipped outside the continental U.S. can be subject to certain restrictions. Freight charges may range from $75–$300.