E-Kleen 173-E Cleaner for Zinc Die Cast, Copper, Brass & Steel

E-Kleen 173-E is recommended for applications where there is limited cleaning equipment - no secondary soak available. It is excellent for short cleaning cycles.
It is recommended as a cathodic cleaner for diecast zinc and white metal with a short current reversal to anodic just prior to removal of a rack, if reversing switches are available. If not, leave cathodic at low current.


It is an excellent combination of soak and anodic electrocleaner for steel and works well anodically on brass and copper.

E-Kleen 173-E is a mildly alkaline powdered mixture which is highly fortified with surface active agents, detergents, suspension agents and builders which is dissolved in water for the fast, effective cleaning of metals.

  If you would like to order this product,

  please request a quote.

Corrosive
Corrosive
Irritant
Irritant
Subtotal $0.00
Out of stock

E-Kleen 173-E is recommended for applications where there is limited cleaning equipment - no secondary soak available. It is excellent for short cleaning cycles.
It is recommended as a cathodic cleaner for diecast zinc and white metal with a short current reversal to anodic just prior to removal of a rack, if reversing switches are available. If not, leave cathodic at low current.


It is an excellent combination of soak and anodic electrocleaner for steel and works well anodically on brass and copper.

Product Questions

Customer Questions
No Questions
Please, mind that only logged in users can submit questions