For Industrial Use

E-Kleen 101

Heavy-duty metal cleaner for steel and copper that splits oils.

Granular, caustic, low-silicate, and high-detergent formulation. Required cleaning time will depend on type of soil, concentration, and temperature. Temperature: 160–200° F. Concentration: 6–10 oz/gal of water. Time: 3–10 minutes.

 

Learn More
For Industrial Use

E-Kleen 102

A heavy-duty liquid, oil splitting, and non-silicated soak cleaner for steel.

A liquid mixture of surface active agents, detergents, and caustic that floats the oil. Contains over 13% by weight surfactants and detergents. Does not contain silicates. Results in a surface free of residual cleaning solutions. Temperature: 130–190° F. Concentration: 6–15% by volume in water.

Learn More
For Industrial Use

E-Kleen 102-E

A heavy-duty, non-silicated liquid soak cleaner that emulsifies oils on steel.

A liquid mixture of surface active agents, detergents, and caustic that emulsifies the oil. Contains over 13% by weight surfactants and detergents. Does not contain silicates. Results in a surface free of residual cleaning solutions. Temperature: 130–195° F. Concentration: 6–15% by volume in water.

Learn More
For Industrial Use

E-Kleen 120

Heavy-duty, strong alkaline, highly conductive electrolytic cleaner for steel and copper.

Most effective when used as a reverse current (anodic) cleaner, although it can be used cathodically. Higher concentration will result in more rapid cleaning and smut removal. Temperature: 180–200° F. Concentration: 8–16 oz/gal of water. Time: 3–6 minutes.

 

Learn More
For Industrial Use

E-Kleen 125

A powdered mixture of surface agents, detergents, suspension agents, and buffers.

The E-Kleen 125 is recommended as a heavy-duty electrolytic and soak metal cleaner. It removes smut while preventing the redepositing of soils. It should be used without an intervening water rinse prior to an electrolytic solution. Varying temperatures and concentrations should be used on different substrates. Contact EPi for more information. 

Learn More
Documentation
Related Products
E-Kleen 173

A mildly alkaline powdered mixture used as an electrolytic and soak cleaner. Contains highly fortified surface active agents,...

E-Kleen 153

A heavy-duty liquid mixture of surface active agents, immersion desmutters, detergents, silicate, phosphates, and caustic that...

Collapse Information
For Industrial Use

E-Kleen 127

Unique liquid concentrate of surfactants and caustic used primarily for the alkaline soak and electrocleaning of steel and copper.

Product is freezable, even with the high sodium hydroxide concentration without crystallization problems. Contains no phosphates, chelates, or certain silicates. Temperature: 140–200° F. Concentration: 5–12% volume in water. Time: Varies.

 

Learn More
For Industrial Use

E-Kleen 129

Heavy-duty granular product formulated for anodic electrocleaning and smut removal on steel and copper.

Non-phosphated, non-chelated, and offers a foam blanket during electrocleaning. High conductivity with heavy soil loading capacity. Temperature: 140–200° F. Concentration: 8–10 oz./gal. of water. Time: 1–2 minutes.

 

Learn More
For Industrial Use

E-Kleen 129-L

A concentrated liquid product formulated for heavy-duty electrocleaning and smut removal on steel and copper.

Non-phosphated, non-chelated, and offers a foam blanket during electrocleaning. High conductivity with heavy soil loading capacity. Temperature: 160–200° F. Concentration: 6–15% by volume. Time: 1–2 minutes. Current density: 50–100 amps/ft2. Voltage: 4–6 volts, anodic.

 

Learn More

E-Kleen 163

A ready-to-use liquid neutral soak cleaner based on phosphates.

Cleans water-soluble oils and petroleum and emulsifies oil and animal fat buffing compounds. Contains organic surfactants and corrosion inhibitors. Doesn't contain caustic soda, silicates, or chelants and doesn't deposit on the side of the tank.

Learn More
Documentation
Related Products
E-Kleen 163-A

A liquid, non-etch neutral soak cleaner based on borates and phosphates. Provides excellent detergency and cleaning on aluminum,...

Collapse Information
For Industrial Use

E-Kleen Defoamer

The E-Kleen Defoamer is a non-silicone based defoaming application.

Very stable at a high pH and can also be added to wastewater treatment systems.

Learn More

There is a small fee for samples shipped in the continental U.S. This can range from $10–$75. Products shipped outside the continental U.S. can be subject to certain restrictions. Freight charges may range from $75–$300.