For Industrial Use

E-Kleen 101

Heavy-duty metal cleaner for steel and copper that splits oils.

Granular, caustic, low-silicate, and high-detergent formulation. Required cleaning time will depend on type of soil, concentration, and temperature. Temperature: 160–200° F. Concentration: 6–10 oz/gal of water. Time: 3–10 minutes.

 

Learn More
For Industrial Use

E-Kleen 102

A heavy-duty liquid, oil splitting, and non-silicated soak cleaner for steel.

A liquid mixture of surface active agents, detergents, and caustic that floats the oil. Contains over 13% by weight surfactants and detergents. Does not contain silicates. Results in a surface free of residual cleaning solutions. Temperature: 130–190° F. Concentration: 6–15% by volume in water.

Learn More
For Industrial Use

E-Kleen 102-E

A heavy-duty, non-silicated liquid soak cleaner that emulsifies oils on steel.

A liquid mixture of surface active agents, detergents, and caustic that emulsifies the oil. Contains over 13% by weight surfactants and detergents. Does not contain silicates. Results in a surface free of residual cleaning solutions. Temperature: 130–195° F. Concentration: 6–15% by volume in water.

Learn More
For Industrial Use

E-Kleen 120

Heavy-duty, strong alkaline, highly conductive electrolytic cleaner for steel and copper.

Most effective when used as a reverse current (anodic) cleaner, although it can be used cathodically. Higher concentration will result in more rapid cleaning and smut removal. Temperature: 180–200° F. Concentration: 8–16 oz/gal of water. Time: 3–6 minutes.

 

Learn More
For Industrial Use

E-Kleen 125

A powdered mixture of surface agents, detergents, suspension agents, and buffers.

The E-Kleen 125 is recommended as a heavy-duty electrolytic and soak metal cleaner. It removes smut while preventing the redepositing of soils. It should be used without an intervening water rinse prior to an electrolytic solution. Varying temperatures and concentrations should be used on different substrates. Contact EPi for more information. 

Learn More
Documentation
Related Products
E-Kleen 173

A mildly alkaline powdered mixture used as an electrolytic and soak cleaner. Contains highly fortified surface active agents,...

E-Kleen 153

A heavy-duty liquid mixture of surface active agents, immersion desmutters, detergents, silicate, phosphates, and caustic that...

Collapse Information
For Industrial Use

E-Kleen 129

Heavy-duty granular product formulated for anodic electrocleaning and smut removal on steel and copper.

Non-phosphated, non-chelated, and offers a foam blanket during electrocleaning. High conductivity with heavy soil loading capacity. Temperature: 140–200° F. Concentration: 8–10 oz./gal. of water. Time: 1–2 minutes.

 

Learn More
For Industrial Use

E-Kleen 129-L

A concentrated liquid product formulated for heavy-duty electrocleaning and smut removal on steel and copper.

Non-phosphated, non-chelated, and offers a foam blanket during electrocleaning. High conductivity with heavy soil loading capacity. Temperature: 160–200° F. Concentration: 6–15% by volume. Time: 1–2 minutes. Current density: 50–100 amps/ft2. Voltage: 4–6 volts, anodic.

 

Learn More
For Industrial Use

E-Kleen 148-B

A heavy-duty liquid detergent that is low-foaming and ideal for cleaning parts in soak cleaning, high-pressure spray washing, and Ransohoff machines.

Effective at low operating temperatures of 100–140° F on all metals without etching aluminum. Contains no chelators and is a low-caustic and non-emulsifiable product. Cleaning time will depend on the type and degree of soil present as well as concentration and temperature. Works well with oil-recovery systems, eliminating dragging in emulsified oils down the finishing line.

Learn More
For Industrial Use

E-Kleen 153

A heavy-duty liquid mixture of surface active agents, immersion desmutters, detergents, silicate, phosphates, and caustic that will emulsify the soils and oils.

Removes carbon smut on steel and other metals. The E-Kleen 153 creates better adhesion, brighter plated parts, and smut-free parts. Does not contain chelators. Ideal for soak, electro, and ultrasonic cleaning methods. Works well in front of E-Brite 5.0 Cu for zamac alloys for an electrocleaner.

Learn More
Documentation
Related Products
E-Brite 5.0 Cu

Alkaline non-cyanide processThe E-Brite 5.0 Cu formula solves the immersion problem in copper barrel plating. It plates directly...

Collapse Information

E-Kleen 154

Samples Available *

A one-step liquid concentrate blend of acid, solvent, surfactants, and complexers that clean and prep a variety of metal surfaces.

Recommended for use following conventional alkaline soak cleaners to ensure neutralization of residual alkalinity prior to acidic blackening or oxidizing processes. Effective as a surface conditioner and activator prior to blackening. Cleans aluminum well with slow, controlled etching of the aluminum surface.

Learn More
Documentation
Related Products
Insta-Blak Z-360

Insta-Blak Z-360 is an easy-to-use, quick-finish room temperature blackening process for diecast and zinc-plated surfaces.  

Insta-Blak A-380

Insta-Blak A-380 is a room-temperature immersion finish for industrial use. Recommended for blackening aluminum objects that do...

Collapse Information

E-Kleen 163

A ready-to-use liquid neutral soak cleaner based on phosphates.

Cleans water-soluble oils and petroleum and emulsifies oil and animal fat buffing compounds. Contains organic surfactants and corrosion inhibitors. Doesn't contain caustic soda, silicates, or chelants and doesn't deposit on the side of the tank.

Learn More
Documentation
Related Products
E-Kleen 163-A

A liquid, non-etch neutral soak cleaner based on borates and phosphates. Provides excellent detergency and cleaning on aluminum,...

Collapse Information
For Industrial Use

E-Kleen 166

A heavy-duty liquid detergent alkaline spray perfect for removing baked-on carbon, cutting oils, waxes, buffing compounds, and other soils.

Contains no chelators or phosphates. Low-foaming and ideal for use in high-pressure spray washing and Ransohoff machines. Low caustic and non-emulsifiable. Do not exceed 150° F. Higher temperatures will decrease the effectiveness of the cleaner. Oil-splitting cleaner works well with oil-recovery systems, preventing emulsified oils from dragging down the finishing line. Also works well in iron phosphate high-pressure spray pre-treatment lines prior to painting.

Learn More
Documentation
Related Products
E-Phos 600

A concentrated liquid cleaner and iron phosphate for steel, aluminum, and zinc. Tolerates alkaline carry-over and can operate at...

Collapse Information
For Industrial Use

E-Kleen 173

A mildly alkaline powdered mixture used as an electrolytic and soak cleaner.

Contains highly fortified surface active agents, detergents, suspension agents, and builders that remove light buffing compounds and light oils. Contains a chrome reducer. Recommended for applications where there is limited cleaning equipment and short cleaning cycles.

Learn More
Documentation
Related Products
E-Brite Ultra Cu

Alkaline non-cyanide process E-Brite Ultra Cu is an outstanding pre-plate copper strike for bright nickel, acid copper, tin, and...

E-Brite 5.0 Cu

Alkaline non-cyanide processThe E-Brite 5.0 Cu formula solves the immersion problem in copper barrel plating. It plates directly...

E-Kleen 125

A powdered mixture of surface agents, detergents, suspension agents, and buffers. The E-Kleen 125 is recommended as a heavy-duty...

E-Kleen 153

A heavy-duty liquid mixture of surface active agents, immersion desmutters, detergents, silicate, phosphates, and caustic that...

Collapse Information
For Industrial Use

E-Kleen 196

A heavy-duty silicated-alkaline, non-emulsifying soak cleaner.

Effective in removing baked-on carbon, cutting oils, waxes, buffing compounds, and other soils. Works well in black oxide and plating lines. Contains no chelators or phosphates. Low caustic and is a non-emulsifier. Should only be used where an oil separator is in place. Effective at 140° F. However, effectiveness doubles at temperatures above 190° F.

Learn More
For Industrial Use

E-Kleen Defoamer

The E-Kleen Defoamer is a non-silicone based defoaming application.

Very stable at a high pH and can also be added to wastewater treatment systems.

Learn More

Room Temperature 65–80° F

There is a small fee for samples shipped in the continental U.S. This can range from $10–$75. Products shipped outside the continental U.S. can be subject to certain restrictions. Freight charges may range from $75–$300.