BLACKENING

The color produced can be varied from light brown to brown to black.

Liquid-emulsifiable alkaline soak cleaner that removes carbon smut from all metals.

A ready-to-use solution that produces a rust patina in orange, yellow, and brown tones.

A universal liquid surface conditioner and activator for steel. Use prior to applying black oxide and rust-patina finishes for steel and cast iron surfaces.

Liquid concentrate used at room temperature as an oxidizing solution on pewter, tin, and lead. Control blackening depth by varying concentration and immersion time.

Liquid concentrate creates a natural verdi, patina green, or blue color on copper alloys. Thick enough to powder coat or lacquer over without losing appearance.

Smut remover and cleaner additive that removes carbon smut and hard-to-clean metalworking fluids. Results in excellent adhesion and brighter plated parts.

The colors produced vary from brown on white metal, silver and tin/lead to purple, grey to black, and gun metal blue on copper, brass and bronze.

A thick-film variety formula that creates a brown-green to brown-orange finish. A fume and acid-free immersion process that requires only seven steps.

A dry, soft-film solvent-based lubricant and rust and corrosion inhibitor for ferrous and non-ferrous metals that produces 18 hours of salt spray. Meets military spec for water displacement (Mil-C-16173D, Grade 3).

A non-emulsifying soak cleaner for removing carbon smut on steel. Works well in black oxide and plating lines, resulting in better adhesion and bright parts.

A dry, satin soft-film solvent-based lubricant and rust and corrosion inhibitor for ferrous and non-ferrous metals. It produces 168 hours of salt spray and meets military spec for water displacement (Mil-C-16173D, Grade 3).