|
Many of our E-Tec products may now be purchased
online, please click on the 'Buy Online' button above for more information
or
click the
icon for the specific item's information. |
Water Displacing Solvent Based Formulations
The E-Tec formulations are solvent based rust and corrosion inhibitors and lubricants for ferrous and nonferrous metals. They rapidly displace moisture from metal pores and recesses leaving a thin, transparent film which seals out moisture. The films are continuous, polar and nonconductive. They will not gum-up under high temperature and high humidity conditions. They are harmless to plastic, rubber and do not contain silicone.
Recommended Uses
- They can be applied to wet or dry metal parts for protection while in process or storage.
- Used to seal and enhance the depth of black of EPI's Insta-Blak and Ultra-Blak black chemical conversion metal finishes.
- They provide excellent protection for unfinished dies, jigs, tools, machine surfaces, office machines, firearms, fasteners, automotive and marine equipment. E-Tec 501 and E-Tec 502penetrate and loosen rusty "frozen" parts.
- The nonconductive E-Tec 505 film dries and lubricates electrical systems, equipment, contacts, switches and motors without interfering with their proper operation.
|
| |
E-Tec 501 |
E-Tec 503 |
E-Tec 504 |
E-Tec 505 |
E-Tec 505+ |
|
Film Characteristic |
slightly oily |
very slightly oily |
dry to the touch |
dry to
the touch |
dry, soft, non-tacky |
Humidity Test
(ASTM-D-1748) |
35 days |
35 days |
35 days |
25 days |
35 days |
Salt Spray Test
(ASTM-B117) |
72-96 hours |
48 hours |
48 hours |
18-24
hours |
96+ hours |
Corrosion Test
(Mil-C-23411 |
pass |
pass |
pass |
pass |
pass |
Corrosion Test
(Mil-C-81309 |
pass |
pass |
pass |
pass |
pass |
Water Displacement
(Mil-C-16173D, Grade 3) |
pass |
pass |
pass |
pass |
pass |
Stain Test
(Mil-C-22235A) |
pass |
pass |
pass |
pass |
pass |
|
Approximate Coverage sq.ft./gallon |
2,200 |
2,000 |
3,000 |
3,400 |
3,400 |
|
Approximate Film Thickness-dip |
0.19 mil |
0.12 mil |
0.05 mil |
0.03 mil |
0.10 mil |
|
Flash Point T.O.C. |
126° |
126° |
125° |
120° |
130° |
|
Weight per gallon, pounds |
6.72 |
6.61 |
6.59 |
6.47 |
6.48 |
|
|
Click below to view additional Rust Preventives and Corrosion Inhibitors:
|
|
 |
